Varotoimet korkeiden - paineletkujen liitosten asentamista varten

(1) The hose cannot be bent excessively during movement or at rest, nor can it be bent at the root, at least 1.5 times its diameter;

(2) When the hose is moved to the extreme position, it should not be pulled too tight, and it should be loose;

(3) Try to avoid torsional deformation of the hose;

(4) The hose should be as far away as possible from the heat radiation member, and it is necessary to wear a heat insulation board;

(5) Letkun ulkoisia vaurioita tulisi välttää, kuten pitkä - kitka saman käytetyn osan pinnalla;

(6) If the hose is excessively deformed due to its own weight, there should be supporting parts.